IBM Books

Nways Multiprotocol Access Services
Protocol Configuration and Monitoring
Reference Version 3.3 Volume 2

Index

A B C D E F G H I J L M N O P R S T U V W
A
  • access-control
  • IPv6 monitoring command (1779)
  • accounting and node statistics (1313)
  • activate
  • APPN monitoring command (1374)
  • activate_new_config
  • APPN configuration command (1365)
  • add
  • AppleTalk Phase 2 configuration command (1413)
  • APPN configuration command (1347)
  • IPv6 configuration command (1747)
  • IPv6 update packet filter configuration command (1765)
  • NDP configuration command (1819)
  • OSI configuration command (1636)
  • RIP6 configuration command (1897)
  • VINES configuration command (1452)
  • Address Resolution Protocol (ARP)
  • VINES (1447)
  • addresses
  • OSI/DECnet V monitoring command (1654)
  • aping
  • APPN monitoring command (1376)
  • AppleTalk Control Protocol
  • for PPP (1401)
  • AppleTalk Phase 2
  • basic configuration procedures (1397), (1404)
  • configuring (1396)
  • monitoring (1407)
  • network parameters (1399), (1405)
  • router parameters (1398)
  • AppleTalk Phase 2 configuration commands
  • add (1412)
  • delete (1414)
  • disable (1416)
  • enable (1418)
  • list (1420)
  • set (1422)
  • AppleTalk Phase 2 monitoring commands
  • atecho (1424)
  • cache (1426)
  • clear counters (1428)
  • counters (1429)
  • dump (1431)
  • interface (1433)
  • APPN
  • monitoring (1368)
  • APPN (DLSw) (1293)
  • APPN configuration commands
  • activate_new_config (1364)
  • add (1346)
  • delete (1360)
  • enable/disable (1338)
  • list (1362)
  • set (1341)
  • TN3270 (1337)
  • APPN Frame Relay BAN Connection Network (1319), (1354), (1355)
  • APPN monitoring commands
  • accessing (1370)
  • activate (1373)
  • aping (1375)
  • deactivate (1377)
  • dump (1379)
  • list (1381)
  • memory (1383)
  • restart (1385)
  • stop (1387)
  • summary (1372)
  • test (1389)
  • tn3270e (1391)
  • transmit (1394)
  • atecho
  • AppleTalk Phase 2 monitoring command (1425)
  • ATM
  • APPN using (1332)
  • ATM LAN Emulation
  • configuring DNA IV (1488)
    • B
  • before you configure (1305)
  • Border Node
  • COS mapping table (1359)
  • routing list (1358)
  • Branch Extender (1253), (1256), (1294), (1348), (1349) , (1350), (1351), (1352), (1353), (1357)
    • C
  • cache
  • AppleTalk Phase 2 monitoring command (1427)
  • IPv6 monitoring command (1781)
  • change
  • IPv6 configuration command (1749)
  • IPv6 update packet filter configuration command (1767)
  • NDP configuration command (1821)
  • RIP6 configuration command (1899)
  • change metric
  • OSI/DECnet V monitoring command (1656)
  • change prefix-address (1639)
  • clear (1641)
  • PIM monitoring command (1865)
  • Client IP Address to LU Name Mapping (1279)
  • CLNP protocol (1567)
  • clnp-Stats
  • OSI/DECnet V monitoring command (1658)
  • command summary
  • DNA IV (1514)
  • configurable Held Alert Queue (1267), (1304), (1345)
  • configuration changes, affect on the router (1289)
  • configuration options (1290)
  • configuration requirements (1291)
  • connection networks (1252)
  • COS (1308)
  • COS mapping table (1298)
  • counters
  • AppleTalk Phase 2 monitoring command (1430)
  • IPv6 monitoring command (1783)
  • VINES monitoring command (1468)
    • D
  • DDD LU
  • TN3270E Server and (1283)
  • DDDLU (1270)
  • deactivate
  • APPN monitoring command (1378)
  • DECnet NCP
  • See NCP (1477)
  • delete
  • AppleTalk Phase 2 configuration command (1415)
  • APPN configuration command (1361)
  • IPv6 configuration command (1751)
  • IPv6 update packet filter configuration command (1769)
  • NDP configuration command (1823)
  • OSI configuration command (1643)
  • PIM configuration command (1849)
  • RIP6 configuration command (1901)
  • VINES configuration command (1453)
  • destination devices (1719)
  • dhcpv6-relay
  • NDP monitoring command (1837)
  • Dial on Demand (1327)
  • APPN using (1326)
  • Digital Network Architecture (DNA) phase IV (1476)
  • disable
  • AppleTalk Phase 2 configuration command (1417)
  • APPN configuration command (1340)
  • IPv6 configuration command (1753)
  • NDP configuration command (1825)
  • OSI configuration command (1645)
  • PIM configuration command (1851)
  • RIP6 configuration command (1903)
  • VINES configuration command (1454)
  • DLUR (1249), (1250), (1301), (1302), (1315)
  • DLUR retry algorithm (1316)
  • DNA IV
  • access control
  • configuring (1502)
  • exclusive (1504)
  • inclusive (1503)
  • managing traffic (1501)
  • addressing
  • 802.5 Token (1487)
  • description (1485)
  • Ethernet data link (1486)
  • X.25 data link (1490)
  • area routers
  • description (1495)
  • level 1 (1496)
  • level 2 (1497)
  • area routing filters (1505)
  • area support of (1479)
  • blending domains (1506)
  • configuration
  • for X.25 (1509)
  • configuring over ATM LAN Emulation (1489)
  • designated router for (1493)
  • LAT protocol (1482)
  • MOP support of (1480)
  • Network Control Program (NCP) (1499)
  • See NCP (1478)
  • routing (1491), (1492)
  • routing parameters (1498)
  • routing tables (1494)
  • special considerations and limitations (1483)
  • terminology and concepts (1484)
  • DNA IV configuration commands
  • define
  • circuit (1517)
  • executor (1519)
  • module access (1521)
  • module routing (1523)
  • node (1525)
  • help (1515)
  • purge
  • module access (1529)
  • module routing (1531)
  • show
  • area (1537)
  • node (1539)
  • show/list
  • circuit (1543)
  • executor (1545)
  • module access (1547)
  • module routing (1549)
  • zero
  • circuit (1555)
  • executor (1557)
  • module access (1553), (1559)
  • DNA IV monitoring commands
  • define
  • circuit (1518)
  • executor (1520)
  • module access (1522)
  • module routing (1524)
  • node (1526)
  • help (1516)
  • purge
  • module access (1530)
  • module routing (1532)
  • show
  • area (1538)
  • node (1540)
  • show/list
  • circuit (1544)
  • executor (1546)
  • module access (1548)
  • routing (1550)
  • zero
  • circuit (1556)
  • executor (1558)
  • module access (1560)
  • module_access (1554)
  • DNA V
  • networks (1507)
  • X.25 configuration
  • Count 2 (1508)
  • DNAV-info
  • OSI/DECnet V monitoring command (1662)
  • dump
  • AppleTalk Phase 2 monitoring command (1432)
  • APPN monitoring command (1380)
  • IPv6 monitoring command (1785)
  • NDP monitoring command (1839)
  • PIM monitoring command (1863)
  • RIP6 monitoring command (1917)
  • VINES (1470)
  • Dynamic Definition of Dependent LUs (1269)
  • host-initiated (1271), (1285)
  • TN3270E Server and (1282)
  • TN3270E Server and host-initiated (1284)
    • E
  • enable
  • AppleTalk Phase 2 configuration command (1419)
  • APPN configuration command (1339)
  • IPv6 configuration command (1755)
  • NDP configuration command (1827)
  • OSI configuration command (1647)
  • PIM configuration command (1853)
  • RIP6 configuration command (1905)
  • VINES configuration command (1457)
  • Enterprise Extender Support for HPR over IP (1287)
  • es-adjacencies
  • OSI/DECnet V monitoring command (1664)
  • ES-IS protocol (1565)
  • description (1628)
  • hello message (1629)
  • es-is-stats
  • OSI/DECnet V monitoring command (1666)
  • exclude lists (1715)
  • exit (1410)
  • console command (1411)
  • VINES monitoring command (1474)
  • Extended Border Node (1254), (1257)
  • configuring (1295)
  • COS mapping table (1299)
  • network requirements (1255)
  • routing list (1297)
  • extensions
  • IBM vendor-private extensions. (1723)
  • path information extensions (1720)
    • F
  • features
  • IP version 6 (IPv6) (1739)
  • focal point (1261), (1303)
    • G
  • getting help (1408)
    • H
  • help
  • console command (1409)
  • How LUs are chosen for client connections (1281)
  • HPR (1248), (1300)
    • I
  • IBM-specific extensions
  • NHRP (1722)
  • implementation on the router (1246)
  • implicit focal point (1268), (1356)
  • interface
  • AppleTalk Phase 2 monitoring command (1434)
  • IPv6 monitoring command (1787)
  • PIM monitoring command (1867)
  • intermediate session data, collecting (1314)
  • internal
  • IPv6 monitoring command (1789)
  • IP
  • packet size (1926)
  • IPv6
  • configuring (1742)
  • overview (1741)
  • using (1740)
  • ipv6 command (1744)
  • IPv6 configuration commands
  • add (1746)
  • change (1748)
  • delete (1750)
  • disable (1752)
  • enable (1754)
  • list (1756)
  • move (1758)
  • set (1760)
  • summary (1745)
  • update (1762)
  • IPv6 monitoring commands
  • access-control (1778)
  • accessing (1774)
  • cache (1780)
  • counters (1782)
  • dump (1784)
  • interface (1786)
  • internal (1788)
  • mcast (1790)
  • mld (1792)
  • packet-filter (1804)
  • path-mtu (1806)
  • ping6 (1808)
  • reset (1794)
  • route (1796)
  • sizes (1798)
  • sniffer (1800)
  • static (1802)
  • summary of (1776)
  • traceroute (1888)
  • traceroute6 (1810)
  • tunnels (1812)
  • IPv6 update packet filter configuration commands
  • add (1764)
  • change (1766)
  • delete (1768)
  • list (1772)
  • move (1770)
  • is-adjacencies
  • OSI/DECnet V monitoring command (1668)
  • IS-IS messages
  • IS to IS hello (IIH) messages (1588)
  • point-to-point (1594)
  • IS-IS protocol
  • description (1582)
  • IS to IS Hello (IIH) messages
  • IS to IS hello (IIH) messages
  • L1 (1591)
  • L2 (1593)
  • IS-IS areas (1583)
  • IS-IS domain (1586)
  • overview (1566)
  • is-is-stats
  • OSI/DECnet V monitoring command (1670)
  • ISDN Permanent Circuit
  • APPN using (1324)
  • ISDN permanent connection (1325)
    • J
  • join
  • PIM monitoring command (1869)
    • L
  • l1-routes
  • OSI/DECnet V monitoring command (1672)
  • l1-Summary
  • OSI/DECnet V monitoring command (1676)
  • l1-Update
  • OSI/DECnet V monitoring command (1680)
  • l2-Routes
  • OSI/DECnet V monitoring command (1674)
  • l2-Summary
  • OSI/DECnet V monitoring command (1678)
  • l2-Update
  • OSI/DECnet V monitoring command (1682)
  • lane shortcut interface (LSI)
  • NHRP (1712)
  • leave
  • PIM monitoring command (1871)
  • link level parameter lists (1321)
  • list
  • AppleTalk Phase 2 configuration command (1421)
  • APPN configuration command (1363)
  • APPN monitoring command (1382)
  • IPv6 configuration command (1757)
  • IPv6 update packet filter configuration command (1773)
  • NDP configuration command (1829)
  • NDP monitoring command (1841)
  • OSI configuration command (1649)
  • PIM configuration command (1855)
  • RIP6 configuration command (1907)
  • RIP6 monitoring command (1915)
  • VINES configuration command (1460)
  • Local Area Terminal (LAT) protocol (1481)
  • LSI (1713) See also lane shortcut interface (LSI)
  • LU parameter list (1322)
  • LU Pooling (1275)
    • M
  • managing network nodes (1259)
  • managing the router network node (1258)
  • mcache
  • PIM monitoring command (1873)
  • mcast
  • IPv6 monitoring command (1791)
  • memory
  • APPN monitoring command (1384)
  • message units, supported, APPN-related alerts
  • mgroup
  • PIM monitoring command (1875)
  • mld
  • IPv6 monitoring command (1793)
  • monitoring
  • APPN (1369)
  • IPv6 monitoring commands (1777)
  • NDP monitoring commands (1835)
  • PIM monitoring commands (1861)
  • RIP6 monitoring commands (1913)
  • move
  • IPv6 configuration command (1759)
  • IPv6 update packet filter configuration command (1771)
  • mstats
  • PIM monitoring command (1877)
  • Multiple TN3270 ports (1277)
    • N
  • NCP
  • description of (1500)
  • NCP configuration commands
  • purge (1528)
  • set (1534)
  • show (1536)
  • show circuit (1542)
  • summary of (1510)
  • zero (1552)
  • NCP monitoring commands
  • purge (1527)
  • set (1533)
  • show (1535)
  • show circuit (1541)
  • summary of (1511)
  • zero (1551)
  • NDP
  • configuring (1814)
  • NDP command (1816)
  • NDP configuration commands
  • add (1818)
  • change (1820)
  • delete (1822)
  • disable (1824)
  • enable (1826)
  • list (1828)
  • set (1830)
  • summary (1817)
  • NDP monitoring commands
  • accessing (1832)
  • dhcpv6-relay (1836)
  • dump (1838)
  • list (1840)
  • ping6 (1842)
  • summary of (1834)
  • neighbor
  • PIM monitoring command (1879)
  • Network Control Protocols (NCP)
  • for PPP interfaces
  • AppleTalk Control Protocol (1403)
  • Next Hop Resolution Protocol See also NHRP
  • overview (1698)
  • next-hop routers (1717)
  • NHRP (1695)
  • benefits (1699)
  • destination devices (1718)
  • examples
  • classic IP environment (1701)
  • classic IP environment with non-NHRP device (1702)
  • Egress Router (1706)
  • LAN emulation (1703)
  • LAN switches (1704)
  • mixed classical IP and ELAN (1705)
  • exclude lists (1714)
  • implementation (1707)
  • disallowed router-to-router shortcuts (1724)
  • IBM-specific extensions (1721)
  • LANE shortcuts (1711)
  • limitations (1700)
  • next-hop routers (1716)
  • virtual network interface (VNI) (1708)
  • NHRP configuration commands (1697)
  • accessing (1726)
  • add (1732)
  • advanced (1730)
  • change (1734)
  • delete (1733)
  • disable (1729)
  • enable (1728)
  • list (1731), (1735)
  • set (1736)
  • summary (1727)
  • NHRP interfaces
  • configuring (1696)
  • monitoring (1725)
  • NHRP monitoring commands
  • accessing (1737)
  • list of (1738)
  • node level parameter lists (1323)
  • node tuning (1309)
  • node types (1245)
    • O
  • Open System Interconnection (OSI)
  • address prefix encoding (1617), (1618), (1620), (1622), (1624)
  • attached L2 IS routers (1609)
  • authentication passwords (1626)
  • designated IS (1597)
  • domain specific part (DSP) (1573)
  • end system (ES) (1561)
  • end system hello messages (1630)
  • ES-IS protocol (1627)
  • external routing (1616)
  • initial domain part (IDP) (1571)
  • description (1572), (1574)
  • intermediate system (IS) (1563)
  • internal routing (1615)
  • IS hello messages (1631)
  • IS to IS hello (IIH) messages (1589), (1595)
  • IS-IS addressing format (1575)
  • address format (1580)
  • AFI (1621)
  • area address (1577)
  • default address prefixes (1625)
  • fixed length IDI (1619)
  • non-pseudonode (1602), (1606)
  • point-to-point (1596)
  • pseudonode (1604), (1608)
  • selector (1579)
  • system ID (1578)
  • variable length IDI (1623)
  • IS-IS areas (1584)
  • IS-IS domain (1585)
  • L1 IIH message (1590)
  • L1 link state updates (1601), (1603)
  • L1 routing (1612)
  • L2 IIH messages (1592)
  • L2 link state updates (1605), (1607)
  • L2 routing (1613)
  • link state databases (1599)
  • link state updates (1600)
  • multicast addresses (1581)
  • network address structure (1570)
  • network addresses (1569)
  • Network Entity Title (NET) (1576)
  • network protocol data units (NPDU) (1562)
  • NSAP addressing (1568)
  • protocols running under (1564)
  • pseudonode (1598)
  • routing metric (1614)
  • routing tables (1611)
  • synonymous areas (1587)
  • unattached L2 IS routers (1610)
  • optional features (1247)
  • OSI
  • configuring (1632)
  • X.25 over OSI (1637)
  • OSI configuration commands
  • add (1635)
  • change prefix address (1638)
  • clear (1640)
  • delete (1642)
  • disable (1644)
  • enable (1646)
  • list (1648)
  • set (1650)
  • summary of (1634)
  • OSI/DECnet V
  • monitoring (1633)
  • OSI/DECnet V monitoring commands
  • addresses (1653)
  • change metric (1655)
  • clnp-stats (1657)
  • designated-router (1659)
  • DNAV-info (1661)
  • es-adjacencies (1663)
  • es-is-stats (1665)
  • is-adjacencies (1667)
  • is-is-stats (1669)
  • l1-routes (1671)
  • l1-summary (1675)
  • l1-update (1679)
  • l2-routes (1673)
  • l2-summary (1677)
  • l2-update (1681)
  • OSI/DECnet V monitoring command (1660)
  • ping-1139 (1683)
  • route (1685)
  • send (echo packet) (1687)
  • subnets (1689)
  • summary of (1652)
  • toggle (alias/no alias) (1691)
  • traceroute (1693)
    • P
  • packet size (1924)
  • packet-filter
  • IPv6 monitoring command (1805)
  • path-mtu
  • IPv6 monitoring command (1807)
  • PIM
  • pim
  • configuring (1844)
  • PIM monitoring command (1881)
  • PIM command (1846)
  • PIM configuration commands
  • delete (1848)
  • disable (1850)
  • enable (1852)
  • list (1854)
  • set (1856)
  • summary (1847)
  • PIM monitoring commands
  • accessing (1858)
  • clear (1864)
  • dump (1862)
  • interface (1866)
  • join (1868)
  • leave (1870)
  • mcache (1872)
  • mgroup (1874)
  • mstats (1876)
  • neighbor (1878)
  • pim (1880)
  • ping (1884)
  • summary of (1860)
  • summary pim (1882)
  • variables (1890)
  • ping
  • PIM monitoring command (1885)
  • ping-1139
  • OSI/DECnet V monitoring command (1684)
  • ping6
  • IPv6 monitoring command (1809)
  • NDP monitoring command (1843)
  • RIP6 monitoring command (1919)
  • Point-to-Point Protocol (PPP)
  • AppleTalk Control Protocol (1402)
  • port level parameter lists (1320)
  • port types supported (1288)
  • protocols
  • Digital Network Architecture (DNA) Phase IV (1475)
    • R
  • reset
  • IPv6 monitoring command (1795)
  • RIP6 monitoring command (1887), (1921)
  • restart
  • APPN monitoring command (1386)
  • restrictions (1317)
  • RIP6
  • configuring (1892)
  • RIP6 command (1894)
  • RIP6 configuration commands
  • add (1896)
  • change (1898)
  • delete (1900)
  • disable (1902)
  • enable (1904)
  • list (1906)
  • set (1908)
  • summary (1895)
  • RIP6 monitoring commands
  • accessing (1910)
  • dump (1916)
  • list (1914)
  • ping6 (1918)
  • reset (1886), (1920)
  • summary of (1912)
  • traceroute6 (1922)
  • route
  • IPv6 monitoring command (1797)
  • OSI/DECnet V monitoring command (1686)
  • routing list (1296)
  • RU size (1310), (1343), (1344)
    • S
  • SDLC (1334)
  • APPN using (1333)
  • Seed router
  • AppleTalk Phase 2 (1400), (1406)
  • send (Echo Packet)
  • OSI/DECnet V monitoring command (1688)
  • set
  • AppleTalk Phase 2 configuration command (1423)
  • APPN configuration command (1342)
  • IPv6 configuration command (1761)
  • NDP configuration command (1831)
  • OSI configuration command (1651)
  • PIM configuration command (1857)
  • RIP6 configuration command (1909)
  • VINES configuration command (1462)
  • sizes
  • IPv6 monitoring command (1799)
  • sniffer
  • IPv6 monitoring command (1801)
  • SNMP managed node, using the router as (1265)
  • sphere of control (1262)
  • static
  • IPv6 monitoring command (1803)
  • stop
  • APPN monitoring command (1388)
  • subnets
  • OSI/DECnet V monitoring command (1690)
  • summary of
  • NCP configuration commands (1512)
  • NCP monitoring commands (1513)
  • summary pim
  • PIM monitoring command (1883)
  • supported message units (1263)
  • supported message units, APPN-related alerts (1264)
    • T
  • talk
  • OPCON command (1371), (1743), (1775), (1815), (1833) , (1845), (1859), (1893), (1911)
  • test
  • APPN monitoring command (1390)
  • TG characteristics (1307)
  • the router as entry point (1260)
  • TN3270 gateway function (1273)
  • tn3270e
  • APPN monitoring command (1392)
  • TN3270E Server (1272), (1286), (1292)
  • Client IP Address to LU Name Mapping (1278)
  • configuration commands (1366)
  • Configuration parameters (1367)
  • Configuring, using DLUR (1335)
  • Configuring, using local node identifier (1336)
  • How LUs are chosen for client connections (1280)
  • LU Pooling (1274)
  • monitoring commands (1393)
  • Multiple TN3270 ports (1276)
  • toggle (Alias/No Alias)
  • OSI/DECnet V monitoring command (1692)
  • Token-Ring 4/16
  • packet size (1925)
  • topology Database Garbage Collection (1266)
  • traceroute
  • IPv6 monitoring command (1889)
  • OSI/DECnet V monitoring command (1694)
  • traceroute6
  • IPv6 monitoring command (1811)
  • RIP6 monitoring command (1923)
  • traces (1311)
  • tracing (1312)
  • transmission group characteristics, setting (1306)
  • transmit
  • APPN monitoring command (1395)
  • transporting data (1318)
  • tunnels
  • IPv6 monitoring command (1813)
    • U
  • update
  • IPv6 configuration command (1763)
  • using the router as SNMP managed node
    • V
  • V.25 bis (1331)
  • V.25bis
  • APPN using (1330)
  • variables
  • PIM monitoring command (1891)
  • VINES (1461)
  • Address Resolution Protocol (ARP) (1448)
  • basic configuration procedures (1449)
  • client nodes (1438)
  • configuring (1435)
  • disabling an interface (1455)
  • disabling globally (1456)
  • enabling an interface (1458)
  • enabling globally (1459)
  • monitoring (1450)
  • monitoring commands (1466)
  • neighbor tables (1443)
  • dumping (1471)
  • setting size (1465)
  • network layer protocols (1439)
  • Address Resolution Protocol (ARP) (1446)
  • Internet Control Protocol (ICP) (1445)
  • Routing Update Protocol (RTP) (1441)
  • VINES IP (1440)
  • overview (1436)
  • routing tables (1442)
  • dumping (1472)
  • setting size (1464)
  • RTP implementation (1444)
  • service nodes (1437)
  • setting number of client nodes (1463)
  • VINES configuration commands (1451)
  • VINES monitoring commands
  • counters (1467)
  • dump (1469)
  • exit (1473)
  • virtual network interface (VNI)
  • NHRP (1709)
  • VNI (1710) See also virtual network interface (VNI)
  • VTAM DSPU (1251)
    • W
  • WAN reroute (1328)
  • WAN restoral (1329)

    • [ Top of Page | Previous Page | Table of Contents | Index ]